Programmable, compact and robust
In standard or customized versions, our electronic control units for DC motors and BLDC motors meet a wide range of requirements. Each controller has a compact, robust design and can be connected via standard plug contacts. Rotation direction, rotation speed, ramps, dynamic braking, current supply, etc. can be controlled via programmable digital and analog inputs and outputs.
Motor control 06.34.017
| Item number | 06.34.017 |
|---|---|
| Item name | M2-MWI-1-30 |
| Motortype | DC |
| Digital input | 1 |
| Digital output | 1 |
| Bus | nein |
| Overcurrent shutdown | |
| Rotating direction | Links-/Rechtslauf |
| Dynamic breaking | |
| Max. power | 15 |
| Steady load current | 3 |
| Supply voltage of control circuit | 24 (15-30) VDC |
| Supply voltage load circuit | 24 (15-30) VDC |
| Voltage | 24 |
Technical description
The module is a two-quadrant motor controller for DC motors, for use in industrial environments.
It ensures that motors are switched on and off.
The current value for the overcurrent cut-off can be set via the DIP switch.
A digital output signals the occurrence of an overcurrent.
The overcurrent fault can be reset via the “Reset” input.
The module is designed for a continuous current of 3A and has an adjustable fade-out time via trimmer TR1.
Notices
Version for switching currents up to 3 A
Control unit with the following functions:
- Reversal of direction of rotation
- Overcurrent cut-off
- Overcurrent signaling output
- Short-circuit detection
- Dynamic braking
For snapping onto the DIN rail EN 50022
Width: 17.5 mm
